OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2309

Ignition Coil D Primary Control Circuit Low

P2309 stands for a grounded control lead to coil D – cylinder 4, which on a four-cylinder engine is the last coil in the row. In 2023 FCA released bulletins 18-022-23 and 18-023-23 for the Alfa Romeo Giulia and Stelvio with the 280 hp 2.0 turbo: P2300-00, P2303-00, P2306-00 and P2309-00 could set together with an EVAP purge code, and the remedy was PCM software rather than parts. On Ford petrol engines of 2020–2023 the coil codes P2300 to P2310 are among the faults that block automatic engine stop-start. On Saab's LDK-engined 9-5 of 2010 the same code needs 4 s of continuous or 50 s of cumulative short and is Type B. When all four low codes appear at once, suspect software or a shared harness section before replacing coils.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 09

Possible causes

  • PCM software fault setting several coil low codes (FCA 2.0 turbo 2023) medium
  • Coil D (cylinder 4) defective high
  • Damaged harness section carrying several coil lines medium
  • Poor contact or moisture at the coil D connector low

Symptoms

  • Check engine light on
  • Misfire on cylinder 4
  • Auto stop-start no longer works (Ford)
  • Reduced power

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2309

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication