OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2308

Ignition Coil C Secondary Circuit

P2308 points at the high-voltage path of coil C, normally cylinder 3: winding, boot and plug. The code is uncommon. FCA's 3.6 V6 in the 2015–2016 Caravan and Town & Country calls it coil 3 secondary circuit with insufficient ionization. For vans built from late July to mid September 2015 FCA bulletin 18-069-16 swapped the PCM and flashed current software, keeping the battery between 13.2 and 13.5 V on a charger during the flash; the labour allowance is half an hour. Ford and GM tables list no secondary-circuit code for coil C at all; there a weak spark only becomes visible as misfire (P0303). Because each misfire sends unburned fuel into the exhaust, CARB requires the MIL to flash once misfire rates threaten the catalyst. Check plug and boot before suspecting the module.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 08

Possible causes

  • Spark plug of cylinder 3 worn or fouled high
  • Boot of coil C leaking high voltage medium
  • FCA vans built 27 July–11 September 2015: PCM fault (bulletin 18-069-16) medium
  • Coil C secondary winding faulty low

Symptoms

  • Check engine light on
  • Misfire on cylinder 3 with P0303 stored
  • Engine runs rough

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2308

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication