OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2305

Ignition Coil B Secondary Circuit

P2305 is about coil B's output side: the secondary winding, the connection to the plug and the spark plug of cylinder 2. Where a maker uses it, the module does not just watch whether the coil was switched, but whether a usable spark happened. Ion sensing is one way: as with Saab's Direct Ignition, a low voltage is applied across the plug outside the firing moment, and the resulting ion current tells the module whether the mixture burned – it can even replace the knock sensor. FCA names P2305 coil 2 secondary circuit with insufficient ionization on 2015–2016 Caravan and Town & Country 3.6 V6 and listed it with P0300–P0306 when misfire, rough running and the MIL called for a new PCM. Unlike P2303/P2304, a clean control line does not rule this code out; spark plugs and boots come first.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 05

Possible causes

  • Spark plug of cylinder 2 worn, oily or with the wrong gap high
  • Coil B boot cracked or damp, spark leaking away medium
  • Coil B secondary winding weak medium
  • Faulty ion-current evaluation in the PCM low

Symptoms

  • Check engine light on
  • Misfire on cylinder 2, sometimes only under load
  • Rough running, raised fuel consumption

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2305

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication