OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2303

Ignition Coil B Primary Control Circuit Low

P2303 tells you that the trigger wire of coil B – cylinder 2 in GM, Saab and VW documentation – has found a path to ground. On the Saab 9-5 2.0 turbo (GM LDK engine, 2010) the check runs continuously below 6,000 rpm with 9–18 V on the ignition feed and sets after 4 s of uninterrupted short or 50 s added up; as a Type B code it turns on the MIL only after a second failing trip. Saab's test plan swaps the suspect coil with that of a healthy cylinder: if the code moves, the coil is bad, otherwise the wiring or the ECM. Ford bulletin 24-2406 warns that Bronco 2.3 (2021–2024) and 3.0 EcoBoost (2022–2024) engines may log P2303 against the wrong cylinder and need a PCM update. FCA's 2023 Alfa Romeo 2.0 turbo bulletins also list P2303-00. Open line: P0352.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number3 / 03

Possible causes

  • Coil B (cylinder 2) faulty, pulling the control line low high
  • Insulation damage on the coil B control wire touching ground medium
  • PCM software assigning the code to the wrong cylinder (Ford Bronco, FCA 2.0 turbo) medium
  • Engine module output stage defective low

Symptoms

  • Check engine light on
  • Misfire on cylinder 2
  • Engine runs on fewer cylinders, less power

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2303

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication