OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22F7

Cylinder 8 Alternative Fuel Injector Control Circuit High

P22F7 means the drive line of the cylinder 8 gas injector cannot be pulled down and stays near supply voltage. Ford lists it with MIL in the 2014 code list; in the conversion data from Altech-Eco/TransEco the cause given is a short to power, keeps the MIL off on dedicated CNG engines and marks the fault as not detectable by gas module version 1.4. Many output stages shut themselves off under such a short to protect the driver, so the valve stays closed and cylinder 8 runs without gas. A bi-fuel truck usually leaves gas mode and drives on gasoline; a dedicated CNG engine keeps misfiring. Check for a pinched wire touching a supply line before replacing the valve or module.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / F7

Possible causes

  • Cylinder 8 control wire pinched against a supply line high
  • Supply and control pins swapped in the gas harness medium
  • Damaged output stage in the control module low

Symptoms

  • Cylinder 8 lean misfire in gas mode
  • Check engine light on (bi-fuel versions)
  • Vehicle stays on gasoline

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P22F7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication