P22F4
Cylinder 7 Alternative Fuel Injector Control Circuit Range/Performance
Plausibility code for the cylinder 7 gas injector circuit: wiring passes the open/short checks, yet the electrical response of the valve does not match what the driver expects. No manufacturer documents this code publicly. For this cylinder, Ford's 2014 overview and the TransEco installer sheet for Ford V8/V10 engines contain just Low (P22F2) and High (P22F3) for this cylinder. The basis is CARB, which requires output components to be checked for correct functional response where feasible. Possible triggers would be a slow or sticking valve, often from compressor oil carried in natural gas, or a coil whose resistance has drifted. Expect intermittent stumbling on gas and possibly a misfire code for cylinder 7.
Possible causes
- Cylinder 7 gas valve slow or sticking from oil residue medium
- Injector coil resistance shifted with heat or age medium
- Weak supply voltage to the gas injector bank low
Symptoms
- Intermittent stumble in gas mode
- Misfire code for cylinder 7 possible
- Check engine light possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P22F4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.