OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22F0

Cylinder 6 Alternative Fuel Injector Control Circuit Range/Performance

Unlike the pure wiring faults P22EE/P22EF, this code is meant for a cylinder 6 gas injector circuit that is electrically intact but behaves implausibly, for example a current rise or switching response that does not fit the command. No manufacturer documents this code publicly: neither the Ford 2014 code list nor the Altech-Eco/TransEco CNG table contains it; both stop at Low and High for this cylinder. The basis is therefore the CARB requirement that output components be checked for proper functional response, not only for circuit continuity. If a manufacturer uses it, a sticking or fouled gas valve and resistance drift of the coil would be the likely triggers, with uneven running on gas.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / F0

Possible causes

  • Cylinder 6 gas valve sticking from oil or deposits carried in the gas medium
  • Coil resistance drifted out of the expected window medium
  • Corroded plug causing a slow current rise low

Symptoms

  • Uneven idle or hesitation in gas mode
  • Cylinder 6 misfire count rising on gas only
  • Check engine light possible

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P22F0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication