P22EB
Cylinder 5 Alternative Fuel Injector Control Circuit High
P22EB reports that the cylinder 5 gas injector control circuit is too high, which TransEco Energy's AFCM list attributes to a short to power with the MIL on for bi-fuel use; Ford's 2014 code list likewise carries P22EB for the MIL. The injector stays closed, so cylinder 5 burns no gas and misfires lean, usually logged together with P0305. Gas injectors pull more current than gasoline injectors: Ford's 2003 bi-fuel CNG documentation notes that their drivers had to be stronger because of the extra heat, which also means a shorted coil quickly overloads the output. Measure the coil resistance and look for chafing against a live feed. P22EA is the low side; the gasoline injector of cylinder 5 reports P0274.
Possible causes
- Cylinder 5 control wire chafed against a supply wire high
- Overheated cylinder 5 gas injector with shorted turns medium
- Overloaded driver output in the gas control module low
Symptoms
- Malfunction indicator lamp on
- Lean misfire on cylinder 5 in gas mode, often with P0305
- Normal running on gasoline
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P22EB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.