OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22EA

Cylinder 5 Alternative Fuel Injector Control Circuit Low

P22EA stands for a low voltage on the cylinder 5 gas injector control wire, a code limited to engines with at least five cylinders. TransEco Energy's AFCM table points to a grounded wire or an open line, lights the MIL in bi-fuel use and applies the gasoline injector fault response; Ford's 2014 code list, written for V8 engines among others, keeps P22EA as a MIL code. A control wire resting on ground can energize the injector without pause, so cylinder 5 may run far too rich and its spark plug may foul; with an open line it misses gas instead. Inspect the wire along the rail of the affected bank first. P22EB is the high side, P22E9 the plain open circuit, and the gasoline injector reports P0273.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / EA

Possible causes

  • Cylinder 5 control wire shorted to ground along the gas rail high
  • Interrupted wire or terminal, flagged as Low by some modules medium
  • Shorted output stage in the gas control module low

Symptoms

  • Malfunction indicator lamp on
  • Cylinder 5 runs rich or misfires in gas mode
  • Fouled spark plug on cylinder 5

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P22EA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication