OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22E9

Cylinder 5 Alternative Fuel Injector Control Circuit/Open

P22E9 is the open-circuit code for the cylinder 5 gas injector and can only appear on engines with five or more cylinders, such as the V6 of GM's bi-fuel Impala or the 6.0-litre V8 of its bi-fuel Silverado and Sierra. The driver detects the break because current is missing when the injector is commanded on. No maker documents P22E9 publicly; TransEco's AFCM list and Ford's 2014 code list only use P22EA and P22EB for cylinder 5, and TransEco treats an open line as Low. On V engines the injector wiring of each bank often runs in its own harness branch, so check the cylinder 5 branch from the module to the injector. Bi-fuel vehicles fall back to gasoline; P0205 is the gasoline counterpart.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / E9

Possible causes

  • Open coil in the cylinder 5 gas injector high
  • Loose connector in the harness branch for this bank medium
  • Open driver output in the gas or injector control module low

Symptoms

  • Malfunction indicator lamp on
  • Engine returns to gasoline after switching to gas
  • Cylinder 5 misfire if gas operation continues

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P22E9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication