P22E4
Cylinder 3 Alternative Fuel Injector Control Circuit Range/Performance
P22E4 points to a cylinder 3 gas injector whose circuit works but whose electrical behaviour does not match the command. Peak-and-hold gas injectors first draw a high opening current and then a lower holding current; Ford's patent US 8,161,946 treats an injector that stays at peak or ignores commands as degraded and reports this back to the engine computer. No maker documents P22E4 publicly. The code is distinct from pressure problems: GM's bi-fuel pickups regulate gas to roughly 896 kPa ahead of the rail, and a wrong rail pressure has its own sensor codes. Here the injector or its driver is suspect, often after oil or debris from the gas has made the armature stick. Cylinder 3 then runs unevenly on gas.
Possible causes
- Armature of the cylinder 3 gas injector gummed up by oil or debris high
- Injector coil aged or overheated, resistance out of range medium
- Weak driver output or poor supply ground low
Symptoms
- Malfunction indicator lamp on
- Intermittent cylinder 3 misfire on gas
- Rising gas consumption
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P22E4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.