P22E2
Cylinder 3 Alternative Fuel Injector Control Circuit Low
P22E2 is logged when the control circuit of the cylinder 3 gas injector reads low. In TransEco Energy's AFCM table the cause column says shorted to ground or open, the MIL comes on in bi-fuel systems and the reaction copies that for a gasoline injector fault. Ford's 2014 code list lists P22E2 as a MIL code. Because a grounded control wire can leave the injector energized, cylinder 3 may be flooded with gas; the catalyst then gets unburnt fuel, and prolonged driving in gas mode is a bad idea. With a broken wire the cylinder is simply starved. Typical spots are chafe points against brackets or the intake manifold. P22E3 is the high side and P22E1 the pure open-circuit code; the gasoline injector uses P0267.
Possible causes
- Cylinder 3 control wire rubbed through against a bracket or the manifold high
- Broken wire or terminal in the cylinder 3 injector circuit medium
- Shorted driver output in the gas control module low
Symptoms
- Malfunction indicator lamp on
- Cylinder 3 runs rich or misfires in gas mode
- Smell of unburnt gas at the exhaust
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P22E2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.