OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22E1

Cylinder 3 Alternative Fuel Injector Control Circuit/Open

P22E1 marks an open control circuit at the cylinder 3 gas injector. Circuit continuity checks of this kind run all the time: California's OBD rule defines continuous monitoring as always enabled with at least two samples per second, so a break is caught within moments once the gas system is in use. No maker documents P22E1 openly. TransEco's AFCM list and Ford's 2014 code list give cylinder 3 only the Low/High codes P22E2 and P22E3, and TransEco counts an open line as Low. On GM's bi-fuel pickups the gas injectors sit on separate rails with hoses leading to nozzles at each intake runner, and their wiring runs along those rails; a pulled connector after work in that area is a common reason. Bi-fuel cars carry on with gasoline.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / E1

Possible causes

  • Cylinder 3 injector connector left off or not latched after service high
  • Open coil in the cylinder 3 gas injector medium
  • Wire broken where the harness runs along the gas rail low

Symptoms

  • Malfunction indicator lamp on
  • Gas mode switches off soon after changeover
  • Cylinder 3 misfire on dedicated gas engines

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P22E1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication