OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22DF

Cylinder 2 Alternative Fuel Injector Control Circuit High

P22DF indicates that the control circuit of the cylinder 2 gas injector reads high, which TransEco Energy's AFCM table attributes to a short to power; MIL on for bi-fuel use. Ford's 2014 code list likewise flags P22DF for the MIL. A line stuck at supply voltage keeps the injector closed, so cylinder 2 burns no gas and misfires lean, while running on gasoline is unaffected. On GM's 2015 bi-fuel Impala the ECM drives the CNG injectors itself and, if it sees a fuel delivery problem in one system, changes over to the other, so the driver may only notice a switch back to gasoline. A coil with internal shorts can produce the same overcurrent. P22DE is the low side; P0265 is the high-side code of the gasoline injector.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / DF

Possible causes

  • Cylinder 2 control wire touching a live supply wire high
  • Internal short in the cylinder 2 gas injector coil medium
  • Driver protection in the control module tripping due to a fault low

Symptoms

  • Malfunction indicator lamp on
  • Cylinder 2 misfires only on gas
  • Unexpected return to gasoline

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P22DF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication