OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22DE

Cylinder 2 Alternative Fuel Injector Control Circuit Low

P22DE stands for a control line of the cylinder 2 gas injector whose voltage is too low. TransEco Energy's AFCM fault table blames a grounded or interrupted wire and turns on the MIL for bi-fuel vehicles; Ford's 2014 OBD code list includes P22DE as a MIL code too. California's OBD rule counts a bi-fuel car among alternate-fueled vehicles just for the periods it actually burns gas, so this monitor matters mainly in gas mode, and on gasoline the car normally behaves as usual. If the grounded wire keeps the injector energized, cylinder 2 is flooded with gas and the plug may foul; a separated wire starves it instead. P22DF is the high side, P22DD the open-circuit code, and P0264 belongs to the gasoline injector.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / DE

Possible causes

  • Cylinder 2 injector control wire grounded on engine or body high
  • Open wire or pin, reported as Low by modules like the TransEco AFCM medium
  • Shorted output transistor in the gas control module low

Symptoms

  • Malfunction indicator lamp on
  • Rich misfire or fouled spark plug on cylinder 2 in gas mode
  • Gas operation interrupted, engine runs on gasoline

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P22DE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication