P22DC
Cylinder 1 Alternative Fuel Injector Control Circuit Range/Performance
P22DC is meant for a cylinder 1 gas injector whose circuit is electrically intact but whose response looks wrong, such as a current trace that never reaches its peak or does not fall back to the hold level, or a coil whose resistance has drifted. A Ford patent on driving a second type of injector through an interface (US 8,161,946) describes this logic: the injector counts as degraded if it ignores on and off commands or stays at peak current. No vehicle maker publishes P22DC; TransEco and Ford's 2014 list stop at Low/High. A sticking injector is a plausible trigger, which is why GM's bi-fuel pickups filter the gas through a coalescing element that keeps oil and liquids away from the injectors. Expect a misfiring cylinder 1 or a return to gasoline.
Possible causes
- Cylinder 1 gas injector sticking from oil residue or debris in the gas high
- Injector coil resistance outside its specification medium
- Weak supply voltage to the injector bank low
- Injector of the wrong type or impedance installed low
Symptoms
- Malfunction indicator lamp on
- Uneven running in gas mode, misfire counts on cylinder 1
- Higher gas consumption or switch back to gasoline
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P22DC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.