OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22DA

Cylinder 1 Alternative Fuel Injector Control Circuit Low

P22DA means the cylinder 1 gas injector control wire reads too low. TransEco Energy's DTC list for its CNG control module (AFCM v1.4) blames either a grounded wire or an open line, turns on the MIL in bi-fuel installations and reacts the same way it would to the matching gasoline injector fault. Ford's 2014 OBD code list carries P22DA as a MIL code as well. With a low-side driver, a control wire touching ground can keep the injector energized whenever its supply is live, so cylinder 1 may get gas without pause and run very rich; an interrupted wire leaves it without gas. P22DB covers the high side and P22D9 the plain open circuit. The gasoline injector of the same cylinder reports through P0261 instead.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / DA

Possible causes

  • Control wire of the cylinder 1 gas injector chafed through to ground high
  • Interrupted control wire or connector (logged as Low by some modules) medium
  • Water or corrosion in the injector connector low
  • Faulty output stage in the gas control module low

Symptoms

  • Malfunction indicator lamp on
  • Very rough running on cylinder 1 in gas mode, possibly rich misfire
  • Gas system switches back to gasoline

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P22DA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication