OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22D9

Cylinder 1 Alternative Fuel Injector Control Circuit/Open

P22D9 reports a broken control circuit at the gas injector of cylinder 1, the solenoid that meters CNG or LPG into the intake port whenever a bi-fuel or dedicated gas engine runs on the alternative fuel. The driver stage notices the break because no current flows when it switches on, or because the expected off-state voltage on its pin is missing. No maker publishes P22D9 itself: the TransEco AFCM list and Ford's 2014 code list only carry the Low/High pair P22DA/P22DB, and TransEco even files an open line under Low. GM's bi-fuel Silverado moves the injectors over to gas one by one starting with cylinder 1, so a break here tends to show up right at the changeover. Bi-fuel cars usually return to gasoline; a dedicated gas engine loses cylinder 1.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / D9

Possible causes

  • Open solenoid winding in the cylinder 1 gas injector high
  • Loose, corroded or unplugged connector at the gas injector medium
  • Broken wire or failed splice in the gas system harness medium
  • Defective driver stage in the gas or engine control module low

Symptoms

  • Malfunction indicator lamp on
  • Engine changes back to gasoline or refuses to switch to gas
  • Misfire on cylinder 1 in gas mode (dedicated engines)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P22D9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication