OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22D3

Turbocharger Turbine Inlet Valve Stuck Closed

P22D3 is stored when the turbine inlet valve does not open on command. In a series two-stage layout all exhaust must then pass the small high-pressure stage even at high load, raising back-pressure and risking overboost or turbo overspeed, so the module caps power. In a parallel-sequential layout the second turbo never comes in. Stellantis documents the code on the 2026 Jeep Cherokee with the 1.6 litre turbo hybrid: bulletin 18-052-26 Rev. A (June 2026) states that P22D3-00 sets falsely on vehicles built from mid-December 2025 to late April 2026 and adds PCM software that disables it. On other vehicles, check for a valve seized by soot, a failed actuator or a lacking vacuum supply. P22D2 is the opposite, a valve stuck open.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / D3

Possible causes

  • Engine software setting the code falsely (Jeep Cherokee 2026 bulletin) medium
  • Valve seized closed by soot or corrosion high
  • Actuator, linkage or vacuum supply unable to open the valve medium

Symptoms

  • Check engine light on
  • Power capped at higher engine speed and load
  • Possible overboost code alongside

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P22D3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication