P22CC
Turbocharger Compressor Outlet Switching Valve Control Circuit High
P22CC indicates that the drive line of the compressor outlet switching valve carries more voltage or current than allowed, usually a short to a battery feed or a solenoid with shorted windings. The output stage of the engine control module then tends to shut down for self-protection, which leaves the switching valve unpowered and the outlet flap in its rest position. On register or two-stage charging this typically means the second compressor branch is no longer brought in or taken out as planned. The test is electrical and continuous, as CARB requires for monitored output parts. No manufacturer publicly documents P22CC. Measure coil resistance against the specification and check whether the wire touches a positive feed; replacing the module is a last resort.
Possible causes
- Control wire shorted to a battery-voltage feed high
- Shorted windings in the switching solenoid medium
- Faulty output stage in the engine control module low
Symptoms
- Check engine light on
- Outlet flap no longer switches, power reduced
- Fault returns as soon as the valve is commanded
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P22CC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.