P22BF
O2 Sensor Negative Current Control Circuit/Open (Bank 2 Sensor 2)
P22BF means the negative current control lead of the bank 2 post-catalyst wide-band probe has lost continuity. That lead is the common return of pump and Nernst cell (VM/IPN on Bosch, COM on NTK); without it neither cell has a reference and the signal freezes near its bias. No maker documents this code publicly. How an open return is spotted shows in the bank 2 front code P2254: VW's 2014 Touareg data book looks for a signal of 1.47-1.52 V with cell resistance above 950 ohms, and Ford for Bosch-type probes waits for 1.45-1.55 V lasting 10 s. Chrysler lists the bank 1 twin P22B2 for the 6.7 Cummins Ram and replaces connectors first. P22C0/P22C1 are low/high, P22BB the reference lead. The lamp lights; driving feels normal.
Possible causes
- Loose, corroded or pushed-out terminal on the return wire high
- Return wire broken by heat or vibration near the exhaust medium
- Internal break in the sensor lead or element medium
Symptoms
- Check engine light
- Bank 2 downstream oxygen value frozen at a constant reading
- Further codes for the same sensor may be stored together
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P22BF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.