OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22BE

O2 Sensor Reference Voltage Circuit High (Bank 2 Sensor 2)

P22BE is stored when the reference voltage lead of the bank 2 downstream wide-band probe carries more voltage than a working Nernst cell can produce. A healthy cell produces well under one volt from a source of roughly 300 ohms, so contact with the heater feed, a 5 V line or battery voltage swamps it, and a cracked ceramic can let heater potential leak into the cell. No maker documents this code publicly. On upstream probes the top of the scale is already an open-circuit criterion: Ford and Saab react above 4.7 V, VW's Touareg above 4.80 V, while Ford files shorts to battery under P0152 for bank 2. Under CARB rules a secondary sensor must also be checked for readings outside its range. P22BB is the open, P22BD the low reading, P22B1 bank 1. The lamp comes on.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / BE

Possible causes

  • Nernst-cell lead shorted to the heater supply or another live wire high
  • Cracked ceramic letting heater voltage into the sensing cell medium
  • Faulty sensor interface in the engine control module low

Symptoms

  • Check engine light
  • Bank 2 downstream oxygen reading pinned at the upper limit
  • Heater codes for the same sensor may appear alongside

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P22BE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication