OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22BD

O2 Sensor Reference Voltage Circuit Low (Bank 2 Sensor 2)

P22BD reports that the Nernst-cell (reference voltage) lead of the bank 2 post-catalyst wide-band probe sits below its valid window. Bosch allows the cell a load of only about 250 microamps, so a lead whose insulation touches ground, or moisture bridging the plug, pulls the signal down quickly. No maker documents this code publicly. Upstream practice shows how close low and open lie: VW's 2014 Touareg data book counts a Nernst voltage under 0.25 V with cell resistance above 950 ohms as an open circuit (P2247), and Ford sends shorts to ground on its front probes to P0151 for bank 2. JLR names the bank 1 front analog P2245 in a bulletin on probes cracked by water splash. P22BB is the open, P22BE the high case, P22B0 bank 1. Mostly only the lamp shows.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / BD

Possible causes

  • Nernst-cell lead chafed through and touching ground high
  • Water or corrosion creating a leakage path in the connector medium
  • Sensing element cracked by water contact on the hot probe medium

Symptoms

  • Check engine light
  • Bank 2 downstream oxygen value missing or at the lower end in live data

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P22BD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication