P22B7
O2 Sensor Pumping Current Trim Circuit High (Bank 1 Sensor 2)
P22B7 is, going by its title, the high fault on the trim circuit belonging to bank 1's downstream wide-band probe. In GM's diesel tables (2016, 2018 and 2025 group 04) the code is a ceiling test on the oxygen value of the second NOx sensor: the 2016 table flags readings above 24 %, which is more oxygen than fresh air holds, in 100 of 200 samples. The test runs only while exhaust back-pressure stays below its limit, no exhaust brake is active and no NOx sensor pressure fault is pending; GM rates it Type B, two trips. GM bulletin 21-NA-149 lists it for the 3.0 Duramax LM2 alongside harness chafing. No public source gives a trim-resistor threshold. P22B5 is the open, P22B6 the low case, P22C4 bank 2. The lamp lights.
Possible causes
- Faulty downstream NOx/oxygen sensor reporting excess oxygen high
- Chafed engine harness affecting the sensor lines (GM 3.0 LM2) medium
- Trim or signal wire shorted to a voltage source low
Symptoms
- Check engine light
- Downstream oxygen value above 21 % in live data
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P22B7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2016/16OBDG04 Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2018/18OBDG04 Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2025/25OBDG04B.pdf
- static.nhtsa.gov/odi/tsbs/2022/MC-10224856-0001.pdf
- bosch-motorsport.com/content/downloads/Raceparts/Resources/pdf/Data Sheet_69034379_Lambda_Sensor_LSU_4.9.pdf