OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22B5

O2 Sensor Pumping Current Trim Circuit/Open (Bank 1 Sensor 2)

P22B5 flags an open trim line on the bank 1 downstream wide-band probe. Bosch LSU probes carry a trimming resistor in the connector module, wired to pin 5 (RT/IA), that sets each sensor's individual characteristic; the controller reads it to scale the measured pump current. Lose that line and the oxygen value can still move, but with the wrong gain. Chrysler's wording speaks of the pump cell current trim of sensor 1/2 and lists the code for 2010-2012 Ram 2500/3500 with the 6.7 Cummins; after the wiring repair its road test compares both sensors during 10-second fuel cut-offs and allows no more than 4 % difference. Saab's upstream analog P2626 is checked in overrun below 750 °C and sets above 4.81 V. P22B6/P22B7 are low/high, P22C2 bank 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / B5

Possible causes

  • Corroded or loose trim-line terminal in the sensor connector high
  • Trim wire broken between sensor connector and ECM or sensor module medium
  • Open trimming resistor in the sensor's connector module low

Symptoms

  • Check engine light
  • Downstream oxygen reading disagrees with the upstream sensor during fuel cut-off
  • Follow-up aftertreatment or catalyst faults possible

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P22B5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication