P22B3
O2 Sensor Negative Current Control Circuit Low (Bank 1 Sensor 2)
P22B3 reports the negative current control line, i.e. the virtual ground of the bank 1 downstream wide-band probe, as too low. Normally the controller lifts this common return to a bias near 2.5 V (Saab measures that at the plug of its 2010 9-5) so that pump current can flow in both directions; a short to chassis ground collapses the bias and with it the measuring range. No maker documents this exact code publicly. Mitsubishi lists the upstream analog P2252 as a two-trip code for the 2022 Outlander, and Ford handles upstream shorts under P0131 instead. P22B2 is the open-circuit code, P22B4 the high one, P22C0 the bank 2 version. Apart from the warning lamp, the driver rarely notices anything.
Possible causes
- Return wire shorted to chassis ground through chafed insulation high
- Internal short inside the wide-band sensor medium
- Faulty bias supply in the ECM or sensor module low
Symptoms
- Check engine light
- Downstream oxygen value implausible or pinned
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P22B3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- static.nhtsa.gov/odi/tsbs/2023/MC-10237505-0001.pdf
- saabwisonline.com/9-5-9650/2010/2-engine/engine-management-and-fuel-system-4-cyl-petrol/fault-diagnosis-diagnostic-trouble-codes/dtc-p2237-p2239-p2243-p2251-or-p2626
- bosch-motorsport.com/content/downloads/Raceparts/Resources/pdf/Data Sheet_69034379_Lambda_Sensor_LSU_4.9.pdf
- newtonnet.co.uk/fiesta/fordobd2012.pdf
- law.cornell.edu/regulations/california/13-CCR-1968.2