OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22B2

O2 Sensor Negative Current Control Circuit/Open (Bank 1 Sensor 2)

P22B2 indicates an open negative current control line on the bank 1 downstream wide-band probe. This is the shared return of pump and sensing cell, the virtual ground (VM/IPN on Bosch, COM on NTK), which the controller holds at a mid-level bias of around 2.5 V. Chrysler lists the code for 2010-2012 Ram 2500/3500 with the 6.7 Cummins and repairs connectors and wiring first; GM names it in 21-NA-149 for the 3.0 Duramax LM2. For the upstream twin P2251, Ford sees an open return as a sensor voltage stuck near 1.5 V for 10 s, GM and Saab as 1.47-1.53 V with cell resistance above 570 ohms. P22B3/P22B4 cover low/high, P22BF bank 2. The warning lamp lights; drivability normally stays the same.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / B2

Possible causes

  • Loose, corroded or pushed-back terminal on the return wire high
  • Return (virtual ground) wire broken in the harness medium
  • Internal open circuit in the downstream wide-band sensor medium

Symptoms

  • Check engine light
  • Downstream oxygen reading frozen near a fixed value
  • Aftertreatment readiness not set

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P22B2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication