P22B0
O2 Sensor Reference Voltage Circuit Low (Bank 1 Sensor 2)
P22B0 says the reference voltage (Nernst-cell) line of the bank 1 downstream wide-band probe sits below its permitted range. On a Bosch LSU the Nernst cell is a high-impedance source that tolerates at most about 250 microamps, so a chafed wire touching ground drags it down at once. No maker documents this exact code publicly. Ford's upstream logic treats a cell voltage under 0.2 V as part of its open-circuit check and books shorted leads under P0131, which shows that makers split these faults differently. JLR lists the upstream analog P2245 in a bulletin on cracked sensors. P22AE is the open case, P22B1 the high one, P22AF the performance check, P22BD the bank 2 equivalent. The driver mainly sees the warning lamp.
Possible causes
- Nernst-cell wire shorted to ground through damaged insulation high
- Internal short in the downstream wide-band sensor medium
- Moisture in the connector creating a leakage path low
Symptoms
- Check engine light
- Downstream oxygen value implausible or unavailable
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P22B0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.