OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22AC

O2 Sensor Positive Current Control Circuit Low (Bank 1 Sensor 2)

P22AC means the pump-current (positive current) line of the bank 1 downstream wide-band probe reads below its allowed window, usually because the wire touches ground or its insulation has worn through. GM includes the code in bulletin 21-NA-149 for 2019-2022 light-duty trucks and SUVs with the 3.0 Duramax LM2, where chafed engine wiring triggers a long list of faults; no public GM table gives a threshold. Not every maker uses this slot: Ford books a shorted lead on its upstream wide-band probes as P0131. Saab rates the upstream analog P2238 as a Type B fault. P22AB is the open-circuit case, P22AD the high one, P22B9 the bank 2 copy. Expect a lit warning lamp and stalled emission monitors rather than a change in driving.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / AC

Possible causes

  • Pump-current wire chafed against the body or exhaust and shorted to ground high
  • Internal short in the downstream wide-band sensor medium
  • Water or contamination bridging the connector pins low

Symptoms

  • Check engine light
  • Downstream oxygen value pinned at an extreme in live data
  • Possible failed emissions inspection because monitors are not ready

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P22AC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication