P22AB
O2 Sensor Positive Current Control Circuit/Open (Bank 1 Sensor 2)
P22AB reports a break in the positive current control line of a wide-band probe mounted behind the catalyst or, on diesels, further down the aftertreatment on bank 1. On a Bosch-style five-wire probe this is the pump-current lead (IP/APE) through which the controller moves oxygen into or out of the pump cell. Chrysler lists the code for 2010-2012 Ram 2500/3500 pickups with the 6.7 Cummins in bulletins 25-004-12 and 25-002-14; the prescribed fix is new sensor connectors or an overlay harness before any sensor is replaced. GM names it in 21-NA-149 among faults from chafed harnesses on the 3.0 Duramax LM2. P22AC/P22AD cover low/high, P22B8 is bank 2, P2237 the upstream twin. The warning lamp comes on; the engine usually runs normally.
Possible causes
- Corroded, loose or poorly crimped terminal in the sensor or sensor-module connector high
- Pump-current wire broken or chafed through along the exhaust medium
- Internal open circuit in the downstream wide-band sensor medium
Symptoms
- Check engine light
- Downstream oxygen reading frozen or missing in live data
- Related catalyst or aftertreatment monitors stay incomplete
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P22AB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- static.nhtsa.gov/odi/tsbs/2012/MC-10128943-9999.pdf
- static.nhtsa.gov/odi/tsbs/2014/MC-10139681-9999.pdf
- static.nhtsa.gov/odi/tsbs/2022/MC-10224856-0001.pdf
- bosch-motorsport.com/content/downloads/Raceparts/Resources/pdf/Data Sheet_69034379_Lambda_Sensor_LSU_4.9.pdf
- law.cornell.edu/regulations/california/13-CCR-1968.2