OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22A8

NOx Sensor Heater Sense Circuit Low (Bank 1 Sensor 2)

P22A8 means the heater sense line of the rear NOx sensor on bank 1 is shorted to ground; the sensor module uses that line to read the element temperature via its resistance. With that line pulled to ground, the module sees a temperature value it cannot trust and cannot regulate the heater properly. GM documents the test on the 3.0L LZ0: ground short at the HTemp pin, judged with dew point reached and sensor supply above 9.9 V, 80 failures in 160 samples, Type B after two trips; the Continental Gen 3.5 sensor debounces such faults internally for 1.5 s. GM's 2017 small diesels use the same check with 20 failures in 40 samples. No public bulletin names this code. P22A6 is the open circuit, P22A9 the short to voltage, P2210 the front sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / A8

Possible causes

  • Heater sense conductor shorted to ground inside the probe high
  • Probe lead insulation damaged against exhaust or body medium
  • Water bridging pins in the probe connector low

Symptoms

  • Malfunction indicator lamp on after two trips
  • Outlet NOx sensor not ready
  • SCR efficiency check does not run

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P22A8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication