OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22A7

NOx Sensor Heater Sense Circuit Range/Performance (Bank 1 Sensor 2)

P22A7 means the heater feedback of the rear NOx sensor on bank 1 shows a heater that does not reach or hold its target, although no open or short is found. GM's 3.0L LZ0 and 2017 small diesels compare the measured heater resistance with its target once supply has been in range for 45 s and dew point passed 180 s ago (Type B); the 6.6L LML fails the sensor if its heater never reports set-point temperature. VW's 2014 Touareg TDI allows 180 s after dew point; Ford uses the code as a signal readiness check. Ford traced it on 2017 to 2020 6.7L Super Duty trucks to water in the NOx connectors (TSB 20-2067, new harness 14406) and on 2023 models to that harness chafing on the EGR cooler, with fuse F18 blown (SSM 51750/51791). Nissan's NTB16-048 replaces the outlet sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / A7

Possible causes

  • Aged heater or element in the outlet NOx probe high
  • Water in the NOx sensor connectors (Ford 6.7L 2017-2020, TSB 20-2067) medium
  • Harness chafed on the EGR cooler with blown supply fuse (Ford 6.7L 2023) medium
  • Weak supply to the sensor module limiting heater power low

Symptoms

  • Malfunction indicator lamp on
  • Outlet NOx sensor becomes ready late or not at all
  • Often stored with U029E or other NOx sensor codes

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P22A7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication