OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22A6

NOx Sensor Heater Sense Circuit (Bank 1 Sensor 2)

Besides the heater supply, a NOx sensor has a sense line through which its module measures the resistance of the heated element and so infers its temperature. P22A6 reports an electrical fault on that feedback line of the rear sensor on bank 1. GM's 3.0L LZ0 sets it for an open circuit at the HTemp pin, 80 failures in 160 samples, Type A after one trip; GM notes that the Continental Gen 3.5 sensor debounces electrical faults internally for 1.5 s. The 2017 small diesels use the same open-circuit check with 20 failures in 40 samples, also Type A. Volvo and Mack list P22A6 among codes that call for a new outlet sensor; GM bulletin 24-NA-094 names it Heater Feedback Circuit and covers it with an LZ0 software update. P22A8/P22A9 are shorts, P22A7 plausibility, P2208 the front sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / A6

Possible causes

  • Open heater sense conductor inside the outlet NOx probe or its lead high
  • Water or corrosion in the probe connector medium
  • Software anomaly (GM 3.0L LZ0 2024, bulletin 24-NA-094) low

Symptoms

  • Malfunction indicator lamp on after one trip
  • Outlet NOx sensor not ready, no downstream value
  • SCR warning on the display

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P22A6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication