OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22A3

NOx Sensor Heater Control Circuit/Open (Bank 1 Sensor 2)

The ceramic element of a NOx sensor measures only after its built-in heater has brought it to several hundred degrees. P22A3 reports a break on the heater control side of the rear sensor on bank 1, behind the SCR catalyst. GM's 6.6L LML sets it when the sensor reports an open heater over CAN longer than 10 s, Type A. On the 3.0L LZ0 the heater control pin is tested for a missing load (80 failures in 160 samples), on the 2017 small diesels the H+ supply pin of the Gen 3.0 sensor; both Type A, so the MIL comes on after one trip. Volvo and Mack read P22A3-13 as a probable outlet sensor failure, and GM bulletin 24-NA-094 lists the code for an LZ0 software update. P22A4 and P22A5 are shorts, P22A6 the heater sense line, P2205 the front sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / A3

Possible causes

  • Heater element in the outlet NOx probe burnt through high
  • Broken conductor between probe and sensor module medium
  • Software anomaly (GM 3.0L LZ0 2024, bulletin 24-NA-094) low

Symptoms

  • Malfunction indicator lamp on after one trip
  • Outlet NOx sensor never reports ready
  • SCR warning on the display

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P22A3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication