OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P22A2

NOx Sensor Circuit Intermittent (Bank 1 Sensor 2)

P22A2 describes a rear NOx sensor on bank 1 whose measuring circuit reports faults that come and go rather than staying present. Smart NOx sensors pass the state of that circuit (open wire, short or no error) to the engine computer over CAN, so brief, repeated fault reports fit this code. No manufacturer publicly documents a threshold for P22A2. The only trace is a Ford notice for 2015 to 2016 6.7L Super Duty trucks (SSM 45920, NHTSA index only) explaining that the code may stay stored after the actual fault has been repaired; CARB requires NOx sensors to be monitored continuously for circuit faults. Look for loose terminals, heat-damaged cable along the exhaust and water in the connector. P229E is the steady fault, P2204 the same pattern at the front sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / A2

Possible causes

  • Loose or corroded terminals at the outlet NOx sensor connector high
  • Harness along the exhaust damaged by heat or vibration medium
  • Sporadic internal fault in the sensor module medium

Symptoms

  • Malfunction indicator lamp that may go out and return
  • Downstream NOx value dropping out briefly
  • Code remains stored after the root fault is fixed

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P22A2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication