P22A1
NOx Sensor Circuit High (Bank 1 Sensor 2)
P22A1 flags a raw value from the rear NOx sensor on bank 1 that is higher than anything plausibly left behind the SCR catalyst. GM's 6.6L LML uses 1,500 ppm, or 2,500 ppm in table 14OBDG10; the 3.0L LZ0 and the 2017 small diesels also use 2,500 ppm, Type B after two trips. VW's 2014 Touareg TDI uses 1,655 ppm or a lambda signal above 1.54. Volvo and Mack count P22A1 among codes that point to a damaged outlet sensor and replace that sensor alone. For Ram ProMaster vans, a 2025 Stellantis case (S2525000001) reports P22A1 together with P20EE, asks for standard diagnosis including the DEF condition and states that engineering is still looking for the root cause. GM includes the code in LZ0 software bulletin 24-NA-094. P22A0 is the lower limit, P2203 the front sensor.
Possible causes
- Outlet NOx sensor reading high due to internal damage high
- DEF quality or dosing problem raising real tailpipe NOx medium
- Engine software anomaly (GM 3.0L LZ0 2024, bulletin 24-NA-094) low
Symptoms
- Malfunction indicator lamp on
- Implausibly high downstream NOx value in live data
- SCR efficiency code P20EE stored alongside
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P22A1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2025/25OBDG04A.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2014/14OBDG04 Engine Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2014/MC-10074008-2280.pdf
- static.nhtsa.gov/odi/tsbs/2021/MC-10201707-0001.pdf
- static.nhtsa.gov/odi/tsbs/2025/MC-11017399-0001.pdf
- static.nhtsa.gov/odi/tsbs/2025/MC-11018070-0001.pdf