OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P229D

Fuel Pressure Regulator B Exceeded Learning Limits - Too High

P229D reports that the learned correction for fuel pressure regulator B has climbed to its upper bound, the opposite of P229C. No manufacturer documents the code publicly, so its logic can only be inferred from the regulator A equivalent P228F: Ford's 2023 diesel summary sets that code after about 10 s when the controller adaptation passes a limit near a 20 % sensor-slope error, and Volvo and Mack link P228F on their truck engines to dirt that reached the high-pressure side. For regulator B, usually the rail pressure valve, a correction pinned at the top points to a valve that needs ever more drive to hold pressure, or a sensor out of calibration. CARB requires such exhausted control authority to be flagged.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 9D

Possible causes

  • Rail pressure regulator valve worn or contaminated medium
  • Rail pressure sensor characteristic drifted medium
  • Contaminated fuel reaching the high-pressure side low

Symptoms

  • Check engine light
  • Occasional unstable rail pressure or rough idle

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P229D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication