OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P229C

Fuel Pressure Regulator B Exceeded Learning Limits - Too Low

P229C means the learned correction for fuel pressure regulator B has reached its lower bound. No manufacturer documents this code publicly. The matching check for regulator A is described by Ford for its 2023 diesels: the controller adapts at steady rail pressure of 600 bar or more and stores P228E or P228F when the adaptation would exceed roughly a 20 % sensor-slope error. On systems with two regulators, such as GM diesels with a pump metering unit (A) and a rail pressure valve (B), the B value describes the learned behaviour of that spill valve. CARB requires a monitor to report a pressure control that has used up its adjustment authority. Expect a lit MIL with little drivability effect; P229D is the upper bound.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 9C

Possible causes

  • Rail pressure regulator valve characteristic drifted medium
  • Rail pressure sensor characteristic drifted medium
  • Adaptation values not reset after a component replacement low

Symptoms

  • Check engine light
  • Usually no noticeable change in driving

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P229C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication