OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2297

O2 Sensor Out of Range During Deceleration (Bank 1 Sensor 1)

P2297 concerns the upstream oxygen sensor of bank 1 and the moment when fuel is cut on deceleration and the sensor should read almost pure air. Diesel calibrations compare the reading in overrun with a modelled value: GM's 6.6L LML faults a gap between measured and calculated value above 0.06 to 0.07, the 3.0L LZ0 a deviation beyond 5 percent (Type B). On the 2023 Jeep Gladiator 3.0L diesel, Stellantis TSB 25-002-24 checks the O2 adaptation after a coast-down and replaces the sensor above 0.0282. Bosch-based petrol engines read the code the other way: with all injectors firing, a signal looking like fuel cut-off sets it (Saab 9-5 2011 LDK: 4 s, Type B; GM 2005 V6 LP1/LY7: over 3.7 V for 10 s). GM bulletin 24-NA-094 lists it for the LZ0; P2298 is bank 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 97

Possible causes

  • Upstream wide-band sensor aged or drifted (wrong reading in air) high
  • Exhaust leak ahead of the sensor drawing in outside air medium
  • Air-mass or fuel model error (MAF, injector leakage, EGR) skewing the expected value medium
  • Engine software needing an update (GM 3.0L LZ0 2024, bulletin 24-NA-094) low

Symptoms

  • Malfunction indicator lamp on after two trips
  • Usually no noticeable change in driving behaviour
  • Possibly stored with P0133 or fuel-quantity codes

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2297

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication