P228F
Fuel Pressure Regulator A Exceeded Learning Limits - Too High
P228F is the upper counterpart of P228E: the learned correction for fuel pressure regulator A has run into its maximum. Ford's 2023 diesel summary applies one test to both codes on the 3.0 L and 6.7 L engines, with a limit near a 20 % rail pressure sensor slope error and about 10 s of monitoring at 600 bar or more. In heavy trucks, Volvo and Mack solutions K01029637 and K40914241 group P228F with P0087 and P016F for 11 L and 13 L common-rail engines; one cause they name is a damaged sealing lip on the second-stage filter that lets dirt reach the high-pressure side. Jaguar Land Rover message SSM 74588 lists P228F on the supercharged AJ126 petrol V6 together with high-pressure pump noise. Expect the MIL, possibly with rough running.
Possible causes
- Dirt in the high-pressure system, e.g. via a leaking fuel filter seal high
- High-pressure pump worn or noisy medium
- Rail pressure sensor characteristic drifted medium
- Low-pressure supply restricted low
Symptoms
- Check engine light
- Noise from the high-pressure pump
- Uneven running in some cases
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P228F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.