OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P228E

Fuel Pressure Regulator A Exceeded Learning Limits - Too Low

P228E reports that the self-learned correction of fuel pressure regulator A has reached its lower bound. Ford, which still calls the part regulator 1, explains the logic in its 2023 diesel summary for the 3.0 L and 6.7 L Power Stroke: whenever requested rail pressure is at least 600 bar, the PCM keeps adapting the pressure controller, and if the adaptation factor drifts beyond a limit equivalent to roughly a 20 % error in rail pressure sensor slope, it stores P228E or P228F after about 10 s. Ford's 2014 PCM code table marks both as MIL codes. A learned value at the floor suggests a pressure sensor whose characteristic has shifted or a pump and regulator no longer matching their model. P228F is the upper bound, P229C the same test for regulator B.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 8E

Possible causes

  • Rail pressure sensor characteristic drifted high
  • Pressure regulator or metering valve worn, characteristic changed medium
  • High-pressure pump delivery deviating from its model low

Symptoms

  • Check engine light without noticeable drivability change
  • Occasional rough running or slower pressure response

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P228E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication