OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2282

Air Leak Between Throttle Body and Intake Valves

P2282 means air enters the intake behind the throttle, so it reaches the cylinders without passing the throttle. Ford uses it as its PCV monitor on turbo engines with speed density: airflow worked out from manifold pressure is compared with airflow through the throttle, and a calculated leak of 1 lb/min or more for at least 5 s, with the throttle at 4 degrees or less, sets the code (2012, 2020-2023 and 2024 summaries). Ford designed the PCV inlet tube so that pulling it off leaves a large, detectable opening. Ford bulletins blame a stuck-open brake vacuum valve or tube on the 2.0 EcoBoost in the 2019-2020 Edge and Nautilus (TSB 20-2151), ice in the manifold of the 2020-2021 Escape hybrid (SSM 49654) and PCM software on the 2023 Maverick hybrid (TSB 23-2193). Land Rover found a detached brake vacuum pipe (LTB01186).

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 82

Possible causes

  • Brake booster vacuum pipe detached or its check valve stuck open high
  • Crankcase ventilation hose disconnected or cracked high
  • Leaking intake manifold gasket, throttle body seal or vacuum hose medium
  • Iced manifold pressure sensor or software miscalculating the leak low

Symptoms

  • High or unstable idle speed
  • MIL on, sometimes with a hissing noise from the engine bay
  • Harder brake pedal if the brake vacuum line is affected

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2282

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication