OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P227F

Air Flow Restriction/Air Leak Between Air Filter and MAF (Bank 2)

P227F means the passage between the air filter and the mass air flow sensor of bank 2 is restricted or lets air in that has bypassed the filter. By today's wording the code belongs to engines with a separate air path and MAF per bank; P2280 is the bank 1 version. FCA nevertheless sets P227F on Ram 2500 and 5500 heavy-duty trucks: STAR case S2218000013 (2022) reports it together with a prompt to service the air filter, sometimes alongside P0299 or P226C, on vehicles below 3,000 miles. The reason was factory filters whose paper media carried too much oil; a fresh filter is the first step. On the same trucks FCA treats the bank 1 sibling P2280 as a two-trip fault. A restricted filter starves the engine of air, so boost and power fall, and diesels may smoke more.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 7F

Possible causes

  • Air filter clogged with dust or soaked with too much oil high
  • Intake opening blocked by snow, leaves or a collapsed duct medium
  • Loose clamp or cracked duct between filter box and MAF on bank 2 medium
  • Faulty filter restriction or inlet pressure sensor low

Symptoms

  • MIL on, on some trucks with an air filter service message
  • Reduced power and boost under load
  • More black smoke on diesel engines

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P227F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication