P227A
Barometric Pressure Sensor C Circuit
P227A is the general circuit fault of barometric pressure sensor C, used when the control unit finds the signal missing or unusable without classifying it as too low or too high. Sensor C is not necessarily a separate ambient sensor: in GM's 2018 diesel tables the BARO C channel belongs to the turbocharger inlet pressure sensor, GM also uses it on the supercharged 6.2 L LT4, and on its 2023-2024 twin-throttle engine it reads pressure ahead of a throttle. No manufacturer documents P227A itself publicly; GM divides circuit monitoring of sensor C into P227C (low), P227D (high) and P227E (erratic). The matching general codes for sensors A and B are P2226 and P222A. With a substitute value the engine keeps running, but altitude and boost corrections lose accuracy.
Possible causes
- Loose connector, corroded pins or damaged wiring at sensor C high
- Sensor C itself failed medium
- 5 V reference or sensor ground shared with other sensors disturbed low
Symptoms
- MIL on
- Usually no noticeable change in driving; slight power loss at altitude possible
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P227A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.