P2277
O2 Sensor Signal Biased/Stuck Rich (Bank 2, Sensor 3)
P2277 is the rich-side counterpart of P2276: the third, post-catalyst sensor on bank 2 does not drop to a lean reading. On such layouts the check normally runs during a fuel cut, when the second catalyst must fill with oxygen before the sensor can respond, so a slow or fouled element shows up here. No manufacturer publishes a threshold for P2277 itself; Jaguar Land Rover lists it among the bank 2 post-catalyst sensor codes of the 2014 to 2016 3.0 supercharged V6 and replaces water-damaged sensors. For reference, VW tests the bank 1 twin P2275 against 0.15 V after 4500 mg of oxygen, and Ford fails a sensor whose lean peak never drops below 0.48 V. A shorted signal wire or oil and coolant fouling are further causes. P2273 is the fault at sensor 2; P0164 a voltage above range.
Possible causes
- Bank 2 third oxygen sensor contaminated or water-damaged high
- Signal wire of sensor 3 touching a voltage source low
Symptoms
- Malfunction indicator lamp on
- No noticeable change in driveability
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2277
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.