P2275
O2 Sensor Signal Biased/Stuck Rich (Bank 1, Sensor 3)
P2275 is the rich-side fault of the third oxygen sensor on bank 1, the last one on systems with two catalysts in series: it keeps a high voltage while the exhaust should be lean. VW's 2014 data books for the CC, Passat and Tiguan check it in fuel cut-off, comparing the voltage with 0.15 V once 4500 mg of oxygen have passed, more than the 3000 mg used for sensor 2 because the extra catalyst stores oxygen first. Jaguar Land Rover includes P2275 among the bank 1 post-catalyst sensor codes of its 2014 to 2016 3.0 supercharged V6 and replaces water-damaged sensors. Fouling by oil, coolant or sealant and a signal wire touching voltage are other plausible causes. P2271 is the same fault at sensor 2; P0144 reports a voltage above the valid range rather than a stuck reading.
Possible causes
- Third oxygen sensor contaminated or damaged by water high
- Signal wire of sensor 3 touching a voltage source low
Symptoms
- Malfunction indicator lamp on
- No noticeable change in driveability
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2275
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.