OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2273

O2 Sensor Signal Biased/Stuck Rich (Bank 2, Sensor 2)

P2273 means the rear oxygen sensor of bank 2 keeps a high voltage when the exhaust of that bank should be lean. GM's 2016 tables (16OBDG05) check this in fuel cut-off and set the code if the signal is above 100 mV after 9 g of air (Type B); GM's 2024 tables (24OBDG07) compare the lowest voltage during a commanded lean phase with 0.20 V over two trips. The Bosch-based 2005 GM V6 leans the bank after a long high-voltage phase and also fails the sensor above 0.202 V four seconds into a fuel cut. Ford treats bank 2 like bank 1 and uses fuel-cut events from model year 2019. Typical causes are a sensor fouled by oil or coolant on that side or a signal wire touching a supply line. P2099 is the post-catalyst trim of bank 2 at its rich limit; P0158 a voltage above the normal range.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 73

Possible causes

  • Bank 2 rear oxygen sensor fouled by oil or coolant high
  • Signal wire touching a supply or heater line low
  • Bank 2 front sensor misreading so that the bank actually runs rich low

Symptoms

  • Malfunction indicator lamp on
  • Catalyst monitor for bank 2 not completing

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2273

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication