OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P226F

Turbocharger Boost Control B Slow Response

P226F is the slow-response fault of boost control B, meaning the actuator of a second turbocharger or of the second stage on twin-turbo, bi-turbo or sequential layouts. Which unit the letter B denotes is up to the manufacturer. The monitoring principle mirrors P226C: the control unit commands a change in vane or wastegate position and expects boost or manifold pressure to follow within a set time. No manufacturer documents P226F publicly. For the A side, Ford's 2023 diesel summary describes an idle test that sweeps the vanes and demands a pressure change within 7 s, and CARB requires diesel engines to detect slow boost response. Likely causes are a sluggish actuator, carbon or varnish in the B turbine housing, or a vacuum or wiring problem on that side. Boost builds hesitantly and the ECM may limit power.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 6F

Possible causes

  • Boost actuator of turbocharger B sluggish or worn high
  • Carbon or varnish restricting vanes or flap on turbocharger B medium
  • Leaking vacuum line or damaged wiring to actuator B medium

Symptoms

  • Delayed boost in the speed range where the second charger takes over
  • MIL on, possibly with reduced power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P226F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication