OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2269

Water in Fuel Condition - Sensor A

P2269 is not a wiring fault but a statement about the fuel: sensor A has detected water. On diesels it means the separator is full; Ram's 2025-26 Cummins 6.7L trucks set it with the MIL, and Stellantis traced a persistent case to incomplete draining, fixed by draining and swapping the sensor's signal and ground pins (TSB 14-004-26). Ford tied P2269 on 2017-18 Super Duty 6.7L trucks to water in connector C3080 and, in other bulletins, to PCM software. GM uses P2269 on flex-fuel petrol engines: if the flex fuel sensor's frequency exceeds 185 Hz in 50 of 63 samples, the fuel's conductivity points to water; Type B in 2018, Type A in 2025. Drain or replace contaminated fuel promptly; water damages injection pumps.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number2 / 69

Possible causes

  • Water separator full and not drained at the service interval high
  • Fuel from the tank or filling station containing water medium
  • Residual water after draining or a wet sensor connector faking the alarm medium
  • Engine control software needing an update low

Symptoms

  • Water-in-fuel lamp or message, on some vehicles also the MIL
  • Rough running, power loss or hard starting if water reaches the injection system
  • Reduced power on some engines to protect the injection system

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2269

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication