P225B
NOx Sensor Calibration Memory (Bank 1 Sensor 2)
P225B is stored when the control unit of the downstream NOx sensor on bank 1 cannot provide valid calibration data from its memory. That sensor sits behind the SCR catalyst and is what the engine computer uses to judge how well urea dosing reduces NOx, so a sensor without trustworthy calibration leaves the catalyst monitor blind. Ford lists P225B as a MIL code in its 2014 PCM code table; a description of the check is not public from any manufacturer. Smart NOx sensors of the Continental type keep an OEM-specific calibration in their attached module, which is why a part for another vehicle can trip such a code. P225A is the upstream counterpart, while P229E to P22A1 cover the electrical faults of this downstream sensor.
Possible causes
- Corrupted or unreadable calibration memory in the downstream NOx sensor module high
- Sensor installed with the wrong part number or an OEM calibration for another application medium
- Moisture or corrosion at the sensor module connector disturbing its supply low
Symptoms
- MIL on with no driveability complaint
- SCR efficiency monitor does not complete or reports P20EE
- Possible emissions test failure because readiness stays incomplete
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P225B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.